Whitehall Manufacturing E-45-S - Manual

Product photo/image above may show some available options
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
E-45-S
Extremity Whirlpools
Last Update: 9/15/09
E Series
45 Gallon
Stationary Whirlpool
E-45-S
Whitehall E-45-S Stationary Whirlpool is
recommended for treatment of the upper extremi-
ties and the lower leg below the knee.
Tank Capacity is 45 gallons.
Whirlpool Tank is 32”L x 15”W x 25”D and is seam-
less welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed
stainless steel rod. Tank bottom is seamless, round-
ed coved design to minimize bacteria buildup. Tank
is also provided with an extended stainless steel
skirt flush to the floor line to conceal internal drain
piping.
A 2” Combination Drain and Overflow, and a Filler
Spout are provided. (See roughing-in dimensions
on the reverse side).
Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.
Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic thermal
overload protector, and lifetime-sealed bearings.
All parts contacting the water are stainless steel,
chrome plated brass or bronze.
Thermometer is provided with a dual scale,
adjustable calibration, and a stem inserts into a
retainer to prevent rattle during whirlpool agita-
tion.
GUIDE SPECIFICATIONS
Provide Whitehall Stationary Whirlpool (specify
model number and options) with a 45-gallon
capacity, 32”L x 15”W x 25”D. Whirlpool shall be fab-
ricated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Tank shall
have a reinforced rim and shall be fitted with a
stainless steel skirt flush to the floor line. Bottom of
tank shall be a seamless, rounded coved design to
minimize bacteria build up. Provide a 2” combina-
tion drain and overflow, and a filler spout. Provide a
turbine assembly with raising and lowering device
which functions both as agitator and emptying
device, permits adjustment of desired height, direc-
tion of water agitation, and can be locked into
place. Turbine assembly shall be UL listed 1/2 HP
jet pump motor with automatic thermal overload
protector, and lifetime-sealed bearings. Provide a
thermometer with a stem retainer to prevent rattle
when whirlpool is in operation.
Use
Member of
U.S. Green
Building Council
Recycleable
Product