Whitehall Manufacturing E-27-M - Manual

Product photo/image above may show some available options
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
E-27-M
Extremity Whirlpools
Last Update: 9/15/09
E Series
27 Gallon
Mobile Whirlpool
E-27-M
Whitehall E-27-M Mobile Whirlpools is
recommended for treatment of the upper extremi-
ties and the lower leg below the knee.
Tank Capacity is 27 gallons.
Whirlpool Tank is 28”L x 15”W x 21”D and is
seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed stain-
less steel rod. Tank bottom is a seamless, rounded
covered design to minimize bacteria buildup.
Heavy Duty Swivel Casters support all mobile
models. Rear pair of casters are lockable for
stabilizing whirlpool during treatment.
Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.
Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected with
an ABS plastic shell, and automatic thermal overload
protector, and lifetime-sealed bearings. All parts
contacting
the water are stainless
steel, chrome plated brass or bronze.
Drain options auxiliary drain valve on the bottom of
the unit. The
E-27-M-SDP has a bottom drain, leading
to a separate, concealed water evacation pump. A hose
is attached to the side of the unit to facilitate the evacu-
ation. The
E-27-M-DS is constructed with an integral
sump which reduces residual water and eliminates the
need for a drain.
Thermometer is provided with a dual scale,
adjustable calibration, and a stem inserts into a
retainer to prevent rattle during whirlpool agita-
tion.
GUIDE SPECIFICATIONS
Provide Whitehall Mobile Whirlpool (specify model
number and options) with a 27-gallon capacity,
28”L x 15”W x 21”D. Whirlpool shall be fabri-
cated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Tank shall
have a reinforced rim. Bottom of tank shall be a
seamless, rounded coved design to minimize bacte-
ria build up. Whirlpool shall have heavy duty swivel
casters with locking device on rear pair of casters.
Provide a turbine assembly with raising and lowering
device which functions both as agitator and empty-
ing device, permits adjustment of desired height,
direction of water agitation, and can be locked into
place. Turbine assembly shall be UL listed 1/2 HP
jet pump motor with automatic thermal overload
protector, and lifetime-sealed bearings. Provide a
thermometer with a stem retainer to prevent rattle
when whirlpool is in operation.
Use
Member of
U.S. Green
Building Council
Recycleable
Product