Whitehall Manufacturing E-15-MU - Manual

Product photo/image above may show some available options
E-15-M
E Series
15 Gallon
Mobile Whirlpool
E-15-M, E-15-MH,
E-15-MU
Model E-15-M shown in photo
Extremity Whirlpools
Whitehall E-15-M Mobile Whirlpools are recom-
mended for treatment of the foot and ankle area, and
when provided with a raised undercarriage, may also
be used in treatment of the upper extremities.
Tank Capacity is 15 gallons.
E-15-M, Mobile Whirlpool is recommended for the
treatment of the foot and ankle.
E-15-MH, is a Mobile Whirlpool with Handle
of heavy duty construction with the hand grip sec-
tion approximately 36” above ground level for ease
in maneuvering the whirlpool from one location to
another.
E-15-MU, is a Mobile Whirlpool with Under-
carriage of heavy duty construction and fixed height
which raises the tank for use in treatment of the upper
extremities.
Whirlpool Tank is 25”L x 13”W x 15”D and is seam-
less welded construction, fabricated from heavy gauge,
type 304 stainless steel, polished to a satin finish. Tank
rim is reinforced with a concealed stainless steel rod.
Tank bottom is a seamless, rounded covered design to
minimize bacteria buildup.
Heavy Duty Swivel Casters support all mobile
models. Rear pair of casters are lockable for stabiliz-
ing whirlpool during treatment.
Turbine Raising and Lowering Device permits
adjustment of desired height and direction of water
agitation towards the area of the body to be treated. It
is spring balanced and provided with a locking device.
Drain options auxiliary drain valve on the bottom of the
u n i t .
T h e
E-15-M-SDP has a bottom drain, leading to a sepa-
rate, concealed water evacation pump. A hose is
attached to the side of the unit to facilitate the evacu-
ation. The E-15-M-DS is constructed with an integral
sump which reduces residual water and eliminates the
need for a drain.
Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic thermal
overload protector, and lifetime-sealed bearings. All
parts contacting the water are stainless steel, chrome
plated brass or bronze.
Thermometer is provided with a dual scale, adjustable
calibration, and a stem inserts into a retainer to pre-
vent rattle during whirlpool agitation.
GUIDE SPECIFICATIONS
Provide Whitehall Mobile Whirlpool (specify model
number and options) with a 15-gallon capacity,
25”L x 13”W x 15”D. Whirlpool shall be fabri-
cated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Bottom of
tank shall be a seamless, rounded coved design to
minimize bacteria build up. Whirlpool shall have heavy
duty swivel casters with locking device on rear pair of
casters. Provide a turbine assembly with raising and
lowering device which functions both as agitator
and emptying device, permits adjustment of desired
height, direction of water agitation, and can be
locked into place. Turbine assembly shall be UL listed
1/2 HP jet pump motor with automatic thermal over-
load protector, and lifetime-sealed bearings. Provide a
thermometer with a stem retainer to prevent rattle
when whirlpool is in operation.
Last Update: 9/15/09
Use
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
Member of
U.S. Green
Building Council
Recycleable
Product