Whitehall Manufacturing Hydrochlor Whirlpool antiseptic - Manual

11 www.whitehallmfg.com (800) 782-7706 (626) 968-6681
HydroTHerapy
Hydrochlor Whirlpool antiseptic
Hydrochlor Whirlpool antiseptic provides you a fast and effective method for santitizing your whirlpool.
Containing 100% Chloromine-T, Hydrochlor is easy to use; simply fill the whirlpool to desired level, drop in
the required amount of Hydrochlor, and agitate 2-3 minutes. Hydrochlor will leave your whirlpool fresh and
clean.
Available in pre-measured packets or bottles, Hydrochlor is fully water-dissolvable and non-toxic for the
safety of your patients.
Hydrochlor advantages
• Includes pre-measured, water-soluble packets that save time
with less mess.
• Eliminates the need for defoamer, saving time and money.
• Eliminates corrosion on stainless steel or chrome equipment.
• Prevents staining to keep equipment, walls, curtains and
clothing clean.
How much Hydrochlor to
use per gallon of water:
13-20 gal 15 gm
26-40 gal 30 gm
44-66 gal 50 gm
70-105 gal 80 gm
176-264 gal 200 gm
282-423 gal 320 gm
NEW!
SaniZene
®
Hard Surface disinfectant
SaniZene Hard Surface Disinfectant has been specifically designed for the
healthcare industry and can be used on all hard surfaces. Use it on your
whirlpools and any other hard, non-porous inanimate surfaces.
SaniZene is a multipurpose, neutral pH, germicidal detergent and deodorant
effective in hard water up to 400 ppm in the presence of a moderate amount
of soil (5% organic serum) according to the AOAC Use-dilution Test.