Whitehall Manufacturing T-8-S - Manual

Last Update: 12/03/13
Whitehall Thermalators have the best elements of
a thermal therapy unit to maintain a constant water
Thermalator shall be fabricated from heavy gauge,
temperature for comfortable effective therapy. Model
type 304 stainless steel, polished to satin finish.
T-4-S is recommended for use in small clinics or
Cover shall have a continuous hinge pin and a built-
home use. Models T-6-S and T-8-S are
in stop that will hold it in the upright position when
recommended for use in medium sized clinics.
open. Heating unit is certified to UL Standards and
Unit is fabricated from heavy gauge, type 304 shall have an adjustable thermostat which ranges
stainless steel polished to a satin finish. Cover has a between 65° and 165°F. On/off switch shall have a
continuous hinge pin and a built in stop that will built-in light to indicate when unit is on.
keep it in the upright position when open. (Thermalators are furnished complete with rack and
a set of Thermal Packs.)
Interior Wire Rack is vinyl coated stainless steel
and will hold Thermal Packs in the upright position.
Heating Unit has a built-in adjustable thermostat
which ranges between 65° and 165°F, and is
certified to UL Standards. On/off switch had a built-in
light to indicate that the unit is on. (Thermalators are
furnished complete with rack and a set of Thermal
Packs.)
GUIDE SPECIFICATIONS
Picture may show some available options
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
T-S
Please visit www.whitehallmfg.com
for most current specifications.
Recyclable
Product
Member of
U.S. Green
Building
Council
Moist Heat Therapy
Thermalator Stationary
Moist Heating Unit
Models T-4-S, T-6-S, T-8-S
Shown from Left to Right
T-4-S, T-6-S and T-8-S