WolfVision VZ-5B - Manual (Page 3)

Connectors (3):
1 Video camera head
2 Light
3 Connectors (on the back
as shown below)
4 Working surface
5 Power on/off switch
6 Light switch
7 Close up lens for camera
8 Pull ring
9 Auto focus on/off key
(a light above this key shows
that the auto focus is on)
10 Zoom keys
11 Infrared remote control
12 Composite video output (VBS)
13 Y/C (S-VHS) output
14 DC input (12 V)
15 DC output for light box
7
9
10
8
3
5
11
6
3 3
2 2
1 1
12 12 13 13 14 14 15 15
POWER LIGHT Y/C VIDEO
Autofocus:
When switching on the unit the
autofocus is automatically switched
on too. The correct focus is
continuously adjusted at a very high
speed. The green light beside the
autofocus on/off switch (9) shines if
the autofocus is on.
Please note that objects with a very
low contrast (like a blank sheet of
paper) are difficult to focus. If the
autofocus does not work just move
the object slightly.
For special applications the autofocus
can also be switched off using the
on/off switch (9). The autofocus is
also switched off when the manual
zoom keys of the remote control are
used.
Manual focusing (if remote control not available):
1. Place an object at the level you wish to
focus - The autofocus is focusing the object.
2. Switch off the autofocus with the on/off
switch (9) - The focus remains unchanged
from now on.
Connect the power cord to the light box
connector (15) on the back side of the
Visualizer.
The light switch (6) of the Visualizer can
now be used to switch between the light of
the Visualizer and the light of the lightbox.
Lightbox Handy (optional):
Other lightboxes:
ENGLISH
4
In order to prevent reflections the light of
the Visualizer always has to be switched
off when working with lightboxes.
ZO OM
FO CU S
IRI S
PR ES ET
off
on
IMA GE
1
2
Portable Visualizer models:
VZ-7 Visualizer with remote control
and serial control input RS232
VZ-5N Japanese Version (with remote
control and serial input RS232)
VZ-5b Visualizer without remote
control and serial input RS232