Extron Electronics SSP 7.1 User Guide - Manual (Page 36)

Speaker Setup Tab
After completing the Main tab, the next tab is Speaker Setup, which is the first tab to
allow system configuration that is not available from the front panel. The Speaker Setup
tab provides access to four second-level tabs (
Speaker Configuration , Speaker Delay ,
Testing & Output Trim , and Speaker Equalization ).
Speaker Configuration Tab
Figure 18. Speaker Configuration Tab
Speaker size
Speaker size determines whether or not bass management applies to that speaker. For more
information about
bass management and speaker size , see pages 15 and 16.
Speaker size settings — All the buttons in a single column offer mutually exclusive
choices. Only one selection can be made from each column. For example, front speaker size
must be set to either 2 Large or 2 Small. It cannot be set to both values or neither value.
Figure 19. Speaker Size Settings
SSP 7.1 • Setup and Control Software 30