IEI Integration PCISA-9652 v1.01 - Manual (Page 112)

PCISA-9652 Half-Size CPU Card
Page 92
HDTV/TV cable with S-Video/Composite/Component output
5.6.2 IDE Cable Connection
The IDE flat cable connects to the PCISA-9652 to one or two IDE devices. To connect an
IDE HDD to the PCISA-9652, please follow the instructions below.
Step 1: Locate the IDE connector. The location of the IDE device connector is shown
in Chapter 3.
Step 2: Insert the connector. Connect the IDE cable connector to the onboard
connector. See Figure 5-13. A key on the front of the cable connector ensures it
can only be inserted in one direction.
Figure 5-13: IDE Cable Connection
Step 3: Connect the cable to an IDE device. Connect the two connectors on the other
side of the cable to one or two IDE devices. Make sure that pin 1 on the cable
corresponds to pin 1 on the connector. Step 0:
5.6.3 SATA Drive Connection