IEI Integration PCISA-9652 v1.01 - Manual (Page 96)

PCISA-9652 Half-Size CPU Card
Page 76
o When working with the PCISA-9652, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the PCISA-9652 DO NOT:
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
Use the product before verifying all the cables and power connectors are
properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the PCISA-9652 is properly installed.
All the items in the packing list are present
The CPU is installed
The CPU cooling kit is properly installed
A compatible memory module is properly inserted into the slot
The jumpers have been properly configured
The PCISA-9652 is inserted into a chassis with adequate ventilation
The correct power supply is being used
The following devices are properly connected
o IDE device
o SATA drives
o Power supply
o USB cable
o Parallel port cable
o Serial port cable
The following external peripheral devices are properly connected to the
chassis:
o VGA screen
o RJ-45 Ethernet cable
o USB devices