B.4 recovery tool functions – IEI Integration PICOe-PV-D4251_N4551_D5251 v1.00 User Manual
Page 132
Advertising
PICOe-PV-D4251/N4551/D5251 User Manual
Page 118
Step 7:
The recovery tool menu appears. (
78
Figure B-25)
Figure B-25: Recovery Tool Menu
Step 8:
Create a factory default image. Follow
Step 2
~
Step 12
described
in Section
78
B.2.5 to create a factory default image.
B.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.
Advertising