IEI Integration PICOe-PV-D4251_N4551_D5251 v1.00 - Manual (Page 74)

PICOe-PV-D4251/N4551/D5251 User Manual
Page 60
Figure 4-17: Dual RS-232 Cable Installation
Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis Step 0:
4.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ RJ-45 Ethernet cable connectors
ƒ PS/2 devices
ƒ USB devices
ƒ VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding PICOe-PV-D4251/N4551/D5251 external peripheral interface
connector making sure the pins are properly aligned.