IEI Integration ICE-QM770 - Manual (Page 48)

ICE-QM770 COM Express Module
Page 36
Step 3: Place the heatspreader plate with the cooling kit on the ICE-QM770, aligning the
retention screw holes (Figure 4-7).
Step 4: Secure the heatspreader plate with the cooling kit onto the baseboard with the
supplied retention screws (Figure 4-7).
Figure 4-7: Secure the Heatspreader Plate with the Cooling Kit to the Baseboard
Step 5: Connect the cooling kit fan cable to the CPU fan connector on the baseboard
(Figure 4-8).