IEI Integration ICE-QM770 - Manual (Page 61)

ICE-QM770 COM Express Module
Page 49
5.3.5 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Mode Selection
[IDE]
S_ATA1 Empty
S_ATA2 Empty
S_ATA3 Empty
S_ATA4 Empty
Determines how SATA
controller(s) operate.
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 7: SATA Configuration
SATA Mode Selection [IDE]
Use the SATA Mode Selection option to configure SATA devices.
IDE D EFAULT Configures SATA devices as normal IDE device.
AHCI Configures SATA devices as AHCI device.
RAID Configures SATA devices as RAID device.
NOTE:
Before accessing the RAID configuration utility, ensure to set the
Option ROM Messages BIOS option in the Boot menu to Force
BIOS. This is to allow the “Press <CTRL+I> to enter Configuration
Utility……” message to appear during POST. Press Ctrl+I when
prompted to enter the RAID configuration utility.