Bios menu 24: graphics configuration – IEI Integration ICE-QM770 User Manual
Page 80
ICE-QM770 COM Express Module
Page 68
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display
[Auto]
DVMT Pre-Allocated
[256M]
DVMT Total Gfx Mem
[MAX]
Primary IGFX Boot Display
[VBIOS Default]
LCD Panel Type
[By Hardware]
Backlight Control
[Inverted]
PID Current Jumper Setting
LVDS Disabled
Select which of
IGFX/PEG/PCI Graphics
device should be Primary
Display Or select SG for
Switchable Gfx.
----------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 24: Graphics Configuration
Primary Display [Auto]
Use the Primary Display option to select the primary graphics controller the system uses.
The following options are available:
Auto
Default
IGFX
PEG
DVMT Pre-Allocated [256M]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can
then only be used as graphics memory, and is no longer available to applications or the
operating system. Configuration options are listed below:
32M
64M
128M
256M
Default
512M
1024M