IEI Integration IEM-LX v1.00 - Manual (Page 53)

IEM-LX-800 ETX CPU Module
SO-DIMM module
Mount the embedded module onto a baseboard
5.3.1 SO-DIMM Installation
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the IEM-LX-800. Please make sure the purchased SO-DIMM complies
with the memory specifications of the IEM-LX-800. SO-DIMM
specifications compliant with the IEM-LX-800 are listed in Chapter 2.
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer to
Figure 5-1.
Figure 5-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket. Place the IEM-LX-800 on an anti-static pad.
Step 2: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket.
Step 3: Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle. (See
Figure 5-1)
Step 4: Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket
Page 53