IEI Integration IEM-LX v1.00 - Manual (Page 69)

IEM-LX-800 ETX CPU Module
Boot Up Numlock Status [On]
Use the Boot Up Numlock Status option to specify the default state of the numeric
keypad.
Off The keys on the keypad are not arrow keys
On (Default) The keys on the keypad are number keys
Gate A20 Option
Use the Gate A20 Option option to if the keyboard controller or the chipset controls the
Gate A20 switching.
Normal The keyboard controller does the switching
Fast (Default) The chipset does the switching
Typematic Rate Setting [Disabled]
Use the Typematic Rate Setting configuration option to specify if only one character is
allowed to appear onto the screen if a key is continuously held down. In other words, the
BIOS only reports the key is down. When this option is enabled, the BIOS reports as
before, but it then waits a moment, and, if the key is still down, it begins to report that the
key has been depressed repeatedly. Such a feature would be used to accelerate cursor
movements with the arrow keys.
Disabled (Default) Disables the typematic rate
Enabled Enables the typematic rate
x Typematic Rate (Chars/sec) [6]
Use Typematic Rate option to specify the rate keys are accelerated. (The Typematic
Rate can only be configured if the Typematic Rate Setting is Enabled.)
6 (Default) 6 characters per second
Page 69