IEI Integration IEM-LX v1.00 - Manual (Page 84)

IEM-LX-800 ETX CPU Module
3BC/IRQ7
Parallel Port Mode [SPP]
Use the Parallel Port Mode option to select parallel port operation mode.
SPP (Default) The parallel port operates in the standard parallel port
(SPP) mode. This parallel port mode works with most
parallel port devices but is slow.
EPP The parallel port operates in the enhanced parallel port
mode (EPP). The EPP mode supports bi-directional
communication between the system and the parallel
port device and the transmission rates between the two
are much faster than the SPP mode.
ECP The parallel port operates in the extended capabilities
port (ECP) mode. The ECP mode supports
bi-directional communication between the system and
the parallel port device and the transmission rates
between the two are much faster than the SPP mode.
ECP+EPP The parallel port is compatible with both ECP and EPP
devices
Normal
EPP Mode Select [EPP1.7]
Use the EPP Mode Select option to select the parallel port mode standard the parallel
port must operate in. (This option is only available if the EPP mode is selected in the
Parallel Port Mode configuration option).
Page 84