IEI Integration ICE-QM871 - Manual (Page 155)

ICE-QM871 COM Express Module
Page 142
Step 2: Enter the Intel® current ME password as it requires (Figure B-10). Enter the IEI
factory ME password: Abab12!@ (the Intel® default password is admin).
NOTE:
The default Intel® ME password is admin. The IEI has reset the
password to Abab12!@ in quality control process. After clearing the
CMOS, the ME password bound to Intel® default password (admin).
Use Intel® default password to enter the Intel® ME BIOS and change
the password (refer to Step 3 below) to be able to configure the Intel®
AMT and ME options.
Figure C-2: Intel® Current ME Password
Step 3: To change the password, select Change Intel® ME Password. Enter a new
password following the strong password rule (containing at least one upper case
letter, one lower case letter, one digit and one special character, and be at least
eight characters). (Figure B-11)