IEI Integration ICE-QM871 - Manual (Page 47)

ICE-QM871 COM Express Module
Page 34
Step 3: Place the heatspreader plate with the cooling kit on the ICE-QM871, aligning the
retention screw holes (Figure 4-5).
Step 4: Secure the heatspreader plate with the cooling kit onto the baseboard with the
supplied retention screws (Figure 4-5).
Figure 4-5: Secure the Heatspreader Plate with the Cooling Kit to the Baseboard
Step 5: Connect the cooling kit fan cable to the CPU fan connector on the baseboard
(Figure 4-6).