IEI Integration ICE-QM871 - Manual (Page 44)

ICE-QM871 COM Express Module
Page 31
Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket.
4.4 Jumper Settings
4.4.1 LVDS Panel Type Selection
Jumper Label: SW1
Jumper Type: DIP switch
Jumper Settings: See Table 4-1
Jumper Location: See Figure 4-2
This switch sets the resolution of the panel attached to the LVDS output. The pin order
listed in the first column of Table 4-1 is: 4 3 2 1. (ON=0, OFF=1)
SW1 EDID Resolution Color Depth Channel
0000 800X600 18-bit Single
0001 1024X768 18-bit Single
0010 1024X768 24-bit Single
0011 1280X768 18-bit Single
0100 1280X800 18-bit Single
0101 1280X960 18-bit Single
0110 1280X1024 24-bit Dual
0111 1366X768 18-bit Single
1000 1366X768 24-bit Single
1001 1440X900 24-bit Dual
1010 1400X1050 24-bit Dual
1011 1600X900 24-bit Dual
1100 1680X1050 24-bit Dual
1101 1600X1200 24-bit Dual
1110 1920X1080 24-bit Dual
1111 1920X1200 24-bit Dual
Table 4-1: LVDS Panel Type Selection