IEI Integration IEM-9452 - Manual (Page 27)

IEM-9452 ETX Module
Page 11
2.5.2 Intel
®
945GME Memory Support
WARNING:
Only DDR2 memory module can be installed on the IEM-9452. Do not
install DDR memory modules. If a DDR memory module is installed on
the IEM-9452, the IEM-9452 may be irreparably damaged.
The Intel ® 945GME Northbridge chipset on the IEM-9452 supports one 200-pin DDR2
SO-DIMM with the following features:
One 200-pin SO-DIMM
DDR2 only (DO NOT install a DDR SO-DIMM)
Single-channel or dual-channel
Capacities of 256 MB, 512 MB, 1 GB or 2 GB
Transfer speeds of 400 MHz, 533 MHz or 667 MHz
64-bit wide per channel
The memory socket is shown in Figure 2-3.
Figure 2-3: 200-pin DDR2 SO-DIMM Socket