IEI Integration IEM-9452 - Manual (Page 75)

IEM-9452 ETX Module
Page 59
Legacy IDE Channels [PATA Pri, SATA Sec]
SATA Only Only the SATA drives are enabled.
PATA Pri, SATA Sec D EFAULT The IDE drives are enabled on the Primary
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
PATA Pri., PATA Sec The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
(This option is available only when ATA/IDE Configurations option is set to Enhanced).
IDE D EFAULT Configures SATA devices as normal IDE device.
Configure SATA Channels [Behind PATA]
Use the Configure SATA Channels option to determine how SATA channels and PATA
channels are ordered. (This option is available only when ATA/IDE Configurations option
is set to Enhanced).
Before PATA Puts SATA channels before PATA channels.
Behind PATA D EFAULT Puts SATA channels behind PATA channels.
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave