IEI Integration IEM-9452 - Manual (Page 83)

IEM-9452 ETX Module
Page 67
BIOS Menu 7: Super IO Configuration
OnBoard Floppy Controller [Enabled]
Use the OnBoard Floppy Controller to enable or disable the floppy controller. If a floppy
disk is not being used in the system, disabling this option frees up system resources that
can be redirected elsewhere in the system.
Disabled Allows BIOS to disable the floppy controller
Enabled D EFAULT Allows BIOS to enable the floppy controller
Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Disabled No base address is assigned to Serial Port 1
3F8/IRQ4 D EFAULT Serial Port 1 I/O port address is 3F8 and the interrupt