IEI Integration KINO-9453 v1.00 - Manual (Page 109)

KINO-9453 Mini-ITX Motherboard
SATA channels” options are presented for configuration.
Configure SATA as [IDE]
Use the Configure SATA as option to specify how to configure the available SATA
devices.
IDE D EFAULT Enables the SATA devices as IDE devices
RAID Enables the SATA devices as a RAID device
AHCI Enables Native Command Queuing (NCQ) and SATA hot
plug capability
If AHCI is chosen, enable the stagger Spinup Support and
take all hard disks on board as master
Configure SATA Channels [Before PATA]
Use Configure SATA Channels option to specify how to configure the available SATA
devices.
Behind
PATA
The system detects the SATA devices after the IDE
devices
Before
PATA
D EFAULT The system detects the SATA devices before the IDE
devices
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Page 91