IEI Integration KINO-9453 v1.00 - Manual (Page 214)

KINO-9453 Mini-ITX Motherboard
Step 3: Save and Exit BIOS. After the SATA support option is enabled, save and exit
the BIOS.
Step 4: Reboot the system. Reboot the system after saving and exiting the BIOS.
Step 5: Press Ctrl+I. During the system boot process, press Ctrl+I when prompted to
enter the RAID configuration software.
Step 6: Configure the RAID settings. Use the Intel
®
Matrix Storage Manager to
configure the RAID array. Brief descriptions of configuration options are given
below.
Step 7: Install the OS. After the RAID array has been configured, install the OS. To do
this, please refer to the documentation that came with the OS. Step 0:
E.4 RAID Configuration
E.4.1 Creating a RAID Volume
WARNING!
All data previously stored on the member drives of a RAID configuration are
destroyed during the RAID initialization process. If “used” drives are used to
create a RAID array, make sure the data has been moved or backed up
before creating a RAID array out of the disk drives.
Page 196