IEI Integration KINO-9453 v1.00 - Manual (Page 139)

KINO-9453 Mini-ITX Motherboard
Allocate IRQ to PCI VGA [Yes]
Use the Allocate IRQ to PCI VGA option to restrict the system from giving the VGA
adapter card an interrupt address.
Yes (Default) Assigns an IRQ to a PCI VGA card if card requests IRQ
No Does not assign IRQ to a PCI VGA card even if the card
requests an IRQ
Palette Snooping [Disabled]
Use the Palette Snooping option to enable or disable the palette snooping function.
Disabled D EFAULT Unless the VGA card manufacturer requires palette
snooping to be enabled, this option should be disabled.
No/
Enabled
PCI devices are informed that an ISA based Graphics
device is installed in the system so the ISA based
Graphics card functions correctly. This does not
necessarily indicate a physical ISA adapter card. The
graphics chipset can be mounted on a PCI card. Always
check with the adapter card manual first, before
modifying the default settings in the BIOS.
PCI IDE BusMaster [Enabled]
Use the PCI IDE BusMaster BIOS option to enable or prevent PCI IDE busmastering.
Disabled Busmastering is prevented
No/Enabled D EFAULT IDE controller on the PCI local bus has mastering
capabilities
Page 121