IEI Integration KINO-CV-D25501_N26001 - Manual (Page 64)

KINO-CV-D25501/N26001 SBC
Page 50
Step 4: Removing a SO-DIMM. To remove a SO-DIMM, push both handles outward.
The memory module is ejected by a mechanism in the socket. Step 0:
4.4 PCIe Mini Card Installation
To install the PCIe Mini card, please refer to the diagram and instructions below.
Figure 4-2: PCIe Mini Card Installation
Step 1: Insert into the socket at an angle. Line up the notch on the card with the notch
on the connector. Slide the PCIe Mini card into the socket at an angle of about
20º.
Step 2: Push down until the card clips into place. Push the other end of the card
down until it clips into place on the plastic connector. Step 0: