IEI Integration KINO-CV-D25501_N26001 - Manual (Page 68)

KINO-CV-D25501/N26001 SBC
Page 54
Jumper Location: See Figure 4-5
The JP4 jumper selects the voltage of the LVDS1 connector.
Pin Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5 V
Table 4-4: LVDS1 Voltage Selection
Figure 4-5: LVDS1 Voltage Selection Jumper Location
4.5.4 LVDS2 Voltage Selection
Jumper Label: JP1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-5
The JP1 jumper selects the voltage of the LVDS2 connector.
Pin Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5 V
Table 4-5: LVDS2 Voltage Selection