IEI Integration KINO-QM770 - Manual (Page 122)

KINO-QM770 Mini-ITX SBC
Page 106
Î PEG0 – Gen X [Gen1]
Use the PEG0 – Gen X option to configure PEG0 B0:D1:F0. The following options are
available:
ƒ Gen1 Default
ƒ Gen2
ƒ Gen3
Î DVMT Pre-Allocated [128MB]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can
then only be used as graphics memory, and is no longer available to applications or the
operating system. Configuration options are listed below:
ƒ 32M
ƒ 64M
ƒ 96M
ƒ 128M Default
ƒ 256M
ƒ 512M
ƒ 1024M
Î DVMT Total Gfx Mem [MAX]
Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used
by the internal graphic device. The following options are available:
ƒ 128M
ƒ 256M
ƒ MAX Default
Î Primary IGFX Boot Display [VBIOS Default]
Use the Primary IGFX Boot Display option to select the display device used by the
system when it boots. Configuration options are listed below.
ƒ VBIOS Default D EFAULT