5 usb connection (dual connector), Figure 4-21: lan connection – IEI Integration KINO-QM770 User Manual
Page 92
KINO-QM770 Mini-ITX SBC
Page 76
Step 1:
Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 3.
Step 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the KINO-QM770. See Figure 4-21.
Figure 4-21: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
Step 0:
4.9.5 USB Connection (Dual Connector)
The external USB 3.0 connectors provide easier and quicker access to external USB
devices. Follow the steps below to connect USB devices to the KINO-QM770.
Step 1:
Locate the USB 3.0 connectors. The locations of the USB 3.0 connectors are
shown in Chapter 3.
Step 2:
Insert a USB 3.0 plug.
Insert the USB 3.0 plug of a device into the USB 3.0 on
the external peripheral interface. See Figure 4-22.
Step 0: