4 internal peripheral device connections, 1 sata drive connection, Nternal – IEI Integration IMB-G41A User Manual
Page 72: Eripheral, Evice, Onnections, Figure 4-11: com 1 pin 9 setting jumper location, Table 4-5: com 1 pin 9 setting jumper settings
Advertising
IMB-G41A Micro-ATX Motherboard
Page 60
The COM Pin 9 Setting jumper configures pin 9 on COM 7~10 as either a +5 V or +12 V
power source. The COM 1 Pin 9 Setting jumper selection options are shown in Table 4-5.
Setting Description
1-2
COM RI Pin use +5 V
2-3
COM RI Pin use +12 V
Table 4-5: COM 1 Pin 9 Setting Jumper Settings
Figure 4-11: COM 1 Pin 9 Setting Jumper Location
4.4 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.4.1 SATA Drive Connection
The IMB-G41A is shipped with two SATA drive cables and one SATA drive power cable.
To connect the SATA drives to the connectors, please follow the steps below.
Advertising