Figure 4-12: sata drive cable connection – IEI Integration IMB-G41A User Manual
Page 73
Advertising
![background image](/manuals/356206/73/background.png)
IMB-G41A Micro-ATX Motherboard
Page 61
Step 1:
Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2:
Insert the cable connector. Press the clip on the connector at the end of the
SATA cable and insert the cable connector into the on-board SATA drive
connector. See Figure 4-12.
Figure 4-12: SATA Drive Cable Connection
Step 3:
Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 4-13.
Step 4:
Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See Figure 4-13.
Step 4:
Advertising