IEI Integration IMBA-G410 v2.00 - Manual (Page 105)

2012/1/202012/1/20
IMBA-G410 ATX Mo th e rb o a rd
P a g e 91
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
 115200 8,n,1 D
EFAULT
 57600 8,n,1
 38400 8,n,1
 19200 8,n,1
 09600 8,n,1
NOTE:
Identical baud rate setting must be set on the host (a management computer
running a terminal software) and the slave
 Re direc tion Afte r BIOS POST [Alwa ys ]
Use the Redirection After BIOS POST option to specify when console redirection should
occur.
 Disabled The console is not redirected after POST

Boot Loader Redirection is active during POST and during Boot
Loader
 Always D EFAULT Redirection is always active (Some OSes may not
work if set to Always)