IEI Integration IMBA-G410 v2.00 - Manual (Page 75)

2012/1/202012/1/20
IMBA-G410 ATX Mo th e rb o a rd
P a g e 61
Figure 4-20: Parallel Device Connector
S te p 3: Secure the connector. Secure the DB-25 connector to the external interface by
tightening the two retention screws on either side of the connector.
4.6.5 S e ria l De vic e Co n n e c tio n
The IMBA-G410 has one male DB-9 connectors on the external peripheral interface panel
for a serial device. Follow the steps below to connect a serial device to the IMBA-G410.
S te p 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
S te p 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-21.