IEI Integration IMBA-G410 v2.00 - Manual (Page 74)

601/20/2012165
P a g e 60
IMBA-G410 ATX Mo th e rb o a rd
Figure 4-19: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. S te p 0:
4.6.4 P a ra lle l De vic e Co n n e c tio n
The IMBA-G410 has a single female DB-25 connector on the external peripheral interface
panel for parallel devices. Follow the steps below to connect a parallel device to the
IMBA-G410.
S te p 1: Locate the DB-25 connector. The location of the DB-25 connector is shown in
Chapter 3.
S te p 2: Insert the DB-25 connector. Insert the DB-25 connector of a parallel device
into the DB-25 connector on the external peripheral interface. See Figure 4-20.