IEI Integration NANO-CV-D25501_N26001 - Manual (Page 110)

NANO-CV-D25501/N26001 EPIC SBC
Page 95
Disabled D EFAULT Disables the LVDS1 connector.
Enabled Enables the LVDS1 connector.
IGFX - Boot Type [VBIOS Default]
Use the IGFX - Boot Type option to select the display device used by the system when it
boots. Configuration options are listed below.
VBIOS Default D EFAULT
CRT
CRT+HDMI
LVDS1
LVDS2
LVDS1 Panel Type [800x600 LVDS]
Use the LVDS1 Panel Type option to select the type of flat panel connected to the LVDS1
connector. Configuration options are listed below.
640x480 LVDS
800x600 LVDS D EFAULT
1024x768 LVDS
1280x1024 LVDS
1366x768 LVDS
1024x600 LVDS
1280x800 LVDS
Backlight Control [Inverted]
Use the Backlight Control option to select the backlight control mode.
Normal Brightest at high voltage level
Inverted D EFAULT Brightest at low voltage level