IEI Integration NANO-HM651 User Manual
Page 56
Advertising
NANO-HM651 EPIC SBC
Page 42
WARNING:
When running the NANO-HM651, do not put the NANO-HM651 directly
on a surface that can not dissipate system heat, especially the wooden
or plastic desk. It is highly recommended to run the NANO-HM651
Æ on a heat dissipation surface or
Æ using copper pillars to hold the board up from the desk below
When the NANO-HM651 is shipped it is secured to a heat sink with eight retention screws.
If the NANO-HM651 must be removed from the heat sink, the eight retention screws must
be removed.
Figure 4-3: Heat Sink Retention Screws
Advertising