IEI Integration NANO-HM651 - Manual (Page 60)

NANO-HM651 EPIC SBC
Page 46
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD
panel.
Setting Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5.0 V
Table 4-4: LVDS Voltage Selection Jumper Settings
Figure 4-6: LVDS Voltage Selection Jumper Location
4.6.4 LVDS Panel Resolution Selection Jumper
Jumper Label: J_PID1
Jumper Type: 8-pin header
Jumper Settings: See Table 4-5
Jumper Location: See Figure 4-7
The LVDS Panel Resolution Selection jumper allows the LVDS screen voltage to be set.
The LVDS Panel Resolution Selection jumper settings are shown in Table 4-5.
Pin Description
Open 640 X 480 (18bit)
1-2 800 X 480 (18bit)
3-4 800 X 600 (18bit)
1-2 and 3-4 1024 X 768 (18bit)
5-6 1024 X 768 (24bit)
1-2 and 5-6 1280 X 1024 (48bit)