IEI Integration NANO-HM651 - Manual (Page 62)

NANO-HM651 EPIC SBC
Page 48
Setting Description
Short 2-3 Clear ME RTC registers
Table 4-6: TPM Setting Jumper Settings
Figure 4-8: TPM Setting Jumper Location
4.6.6 Flash Descriptor Security Override Jumper
Jumper Label: J_FLASH1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-7
Jumper Location: See Figure 4-9
The Flash Descriptor Security Override jumper specifies whether to override the flash
descriptor.
Setting Description
Short 1-2 Disabled (No override)
Short 2-3 Enabled (Override)
Table 4-7: Flash Descriptor Security Override Jumper Settings