IEI Integration PM-PV-N4551_D5251 - Manual (Page 54)

PM-PV-D4251/N4551/D5251 User Manual
Page 42
Connector Type Label
AT/ATX Power Mode Jumper 3-pin header JP1
Clear CMOS Jumper 3-pin header J_CMOS1
CompactFlash® Setup 3-pin header JP3
LVDS Voltage Selection 3-pin header J_LVDS1
PCI-104 Voltage Setup 3-pin header JP3
COM 2 Function Select Jumper 6-pin header JP1
Table 4–1: Jumper Settings
4.6.1 AT/ATX Power Mode Jumper
Jumper Label: ATXCTL1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-2
Jumper Location: See Figure 4-3
The AT Power Select jumper specifies the systems power mode as AT or ATX.
Setting Description
2-3 Use AT power
Open Use ATX power
Table 4-2: AT/ATX Power Mode Jumper Settings