IEI Integration WAFER-CV-D25501_N26001 - Manual (Page 64)

WAFER-CV-D25501/N26001 3.5" Motherboard
Page 49
Figure 4-7: Audio Kit Cable Connection
Step 3: Connect the audio devices. Connect one speaker to the line-in audio jack, one
speaker to the line-out audio jack and a microphone to the mic-in audio jack.
4.6.2 LVDS LCD Installation
The WAFER-CV-D25501/N26001 can be connected to a TFT LCD screen through the
LVDS crimp connectors on the board. To connect a TFT LCD to the
WAFER-CV-D25501/N26001, please follow the steps below.
Step 1: Locate the connector. The locations of the LVDS connectors are shown in
Chapter 3.
Step 2: Insert the cable connector. Insert the connector from the LVDS PCB driving
board to the LVDS connector as shown in Figure 4-8. When connecting the
connectors, make sure the pins are properly aligned.