IEI Integration WAFER-CV-D25501_N26001 - Manual (Page 73)

WAFER-CV-D25501/N26001 3.5" Motherboard
Page 58
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector.
4.7 External Peripheral Interface Connection
This section describes connecting devices to the external connectors on the
WAFER-CV-D25501/N26001.
4.7.1 LAN Connection
The RJ-45 connector enables connection to an external network. To connect a LAN cable
with an RJ-45 connector, please follow the instructions below.
Step 1: Locate the RJ-45 connector. The locations of the RJ-45 connectors are shown
in Chapter 3.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with the
RJ-45 connector on the WAFER-CV-D25501/N26001. See Figure 4-19.
Figure 4-19: LAN Connection