IEI Integration WAFER-CV-D25501_N26001 - Manual (Page 69)

WAFER-CV-D25501/N26001 3.5" Motherboard
Page 54
Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch
on the connector. Slide the PCIe Mini card into the socket at an angle of about
20º (Figure 4-14).
Figure 4-14: Insert the Half-size PCIe Mini Card into the Socket at an Angle
Step 4: Secure the half-size PCIe Mini card. Secure the half-size PCIe Mini card with
the two retention screws previously removed (Figure 4-15).
Figure 4-15: Secure the Half-size PCIe Mini Card
4.6.5 SATA Drive Connection
The WAFER-CV-D25501/N26001 is shipped with a SATA drive cable. To connect the
SATA drive to the connector, please follow the steps below.