IEI Integration ECW-281B-N270-WT v2.10 - Manual (Page 158)

ECW-281B-R21/N270 Embedded System
Page 142
Figure B-14: Select a Local Source Drive
Step 6: Select a source partition (Part 1) from basic drive as shown in
780H780H862H862H864H
Figure B-15 .
Then click OK.
Figure B-15: Select a Source Partition from Basic Drive
Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(
781H781H863H863H865H
Figure B-16 ). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .