A.2.5 create factory default image, Figure a-6: press any key to continue, Figure a-7: press f3 to boot into recovery mode – IEI Integration uIBX-200-VX800 v1.04 User Manual
Page 87
uIBX-200-VX800 Embedded System
Page 77
Step 6:
After completing the system configuration, press any key in the following window
to reboot the system.
Figure A-6: Press any key to continue
Step 7:
Eject the recovery CD.
Step 0:
A.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Step 1:
Turn on the system. When the following screen displays (Figure A-7), press the
<F3> key to access the recovery tool. The message will display for 10 seconds,
please press F3 before the system boots into the operating system.
Figure A-7: Press F3 to Boot into Recovery Mode
Step 2:
The recovery tool menu appears. Type <4> and press <Enter>. (Figure A-8)