IEI Integration TANK-101B-D525_N455 v1.10 - Manual (Page 33)

TANK-101B/BW Embedded System
Page 22
3.7.2 CAN-bus Connectors
CN Type: DB-9 connector
CN Location: See Figure 1-2
CN Pinouts: See Table 3-2 and Figure 3-9
There are two CAN-bus connectors with isolation. The pinouts for the CAN-bus connector
are listed in the table below.
Pin Description Pin Description
1 NC 6 NC
2 CANL 7 CANH
3 GND 8 NC
4 NC 9 NC
5 NC
Table 3-2: CAN-bus Connector Pinouts
Figure 3-9: CAN-bus Connector Pinout Location
3.7.3 CompactFlash® Card Slot
The TANK-101B/BW has one CF card slot. To install the CF card, refer to Section 3.2.
3.7.4 LAN Connectors
CN Type: RJ-45
CN Location: See Figure 1-3
CN Pinouts: See Table 3-3
The LAN connectors allow connection to an external network.