IEI Integration TANK-GM45A - Manual (Page 34)

TANK-GM45 Embedded System
Page 24
The VGA connector connects to a monitor that accepts VGA video input.
Step 1: Locate the female DB-15 connector . The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
TANK-GM45. See Figure 3-17. Step 3:
Figure 3-17: VGA Connector
Figure 3-18: VGA Connector