IEI Integration TANK-820-H61 v2.00 - Manual (Page 36)

TANK-820 Em b e d d e d S ys te m
P a g e 23
Figure 3-8: System Fan Installation
S te p 4: Connect the system fan cable to the CPU_FAN1 connector on the motherboard
of TANK-820.
S te p 5: Reconnect the SATA signal and power cables to the TANK-820.
S te p 6: Reinstall the cover.
3.5 Mo u n tin g th e S ys te m with Mo u n tin g Bra c ke ts
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S te p 1: Turn the embedded system to the left side panel.
S te p 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom surface or the left side panel (Figure 3-9).