IEI Integration TANK-820-H61 v2.00 - Manual (Page 48)

TANK-820 Em b e d d e d S ys te m
P a g e 35
S te p 3: Insert the VGA connector . Once the connectors are properly aligned with,
insert the male connector from the VGA screen into the female connector on the
TANK-820. See Figure 3-25.
Figure 3-25: VGA Connector
S te p 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
Figure 3-26: VGA Connector
3.8 P o we rin g On /Off th e S ys te m
WARNING:
Make sure a power supply with the correct input voltage is being fed into