Figure a-14: select a local source drive – IEI Integration TANK-820-H61 v2.03 User Manual
Page 122
Advertising
TANK-820-H61 Em b e d d e d S ys te m
P a g e 109
Figure A-14: Select a Local Source Drive
S te p 6:
Select a source partition (Part 1) from basic drive as shown in Figure A-15.
Then click OK.
Figure A-15: Select a Source Partition from Basic Drive
S te p 7:
Select 1.2: [Recovery] NTFS drive and enter a file name called
iei
(Figure A-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be
iei.GHO
.
Advertising